Kingston HyperX 2x4GB DDR3 1600Mhz Kit RAM

‹ ›

( Code: P44006 )

Deal: $ 58^.95 GST Inc.

$159.00 Save: $100.05 (63%) Availability: Out Of Stock (Coming Soon)

Shipped from Australia

Combine Shipping and Save
Save with shoppingsquare.com.au when you buy more, you save more!

We offer shipping discounts for multiple item purchases and checkouts.

Here's how it works.

For the first item or single item - it's full delivery price. But for each additional item
- Delivery charge less than or equals to $20: 50% off the delivery price
- Delivery charge greater than $20: $10 off the delivery price
That's a huge saving! So buy up, buy up. We work hard everyday to reduce unnecessary costs so that you save money and have more time to shop with us. We love to see you back.

Our shipping costs also include full transit insurance to protect your purchase in the unlikely event that your order is lost in transit. We're always looking out for you at Shoppingsquare.com.au
Estimated Handling Time: 5 - 10 Working Days

Kingston HyperX 2x4GB DDR3 1600Mhz Kit RAM [KHX1600C9D3T1K2/8GX]

JEDEC standard 1.5V ± 0.075V Power Supply
VDDQ = 1.5V ± 0.075V
667MHz fCK for 1333Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 5,6,7,8,9,10
Posted CAS
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4
which does not allow seamless read or write [either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe
Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
Asynchronous Reset
PCB : Height 2.401” (61.00mm) w/ heatsink, double sided component

Description

Kingston's KHX1600C9D3T1K2/8GX is a kit of two 512M x 64-bit (4GB) DDR3-1600MHz CL9 SDRAM (Synchronous DRAM) memory modules, based on sixteen 256M x 8-bit DDR3 FBGA components per module. Each module kit supports Intel® XMP (Extreme Memory Profiles). Total kit capacity is 8GB. This module kit has been tested to run at DDR3-1600MHz at a low latency timing of 9-9-9-27 at 1.65V. The SPD's are programmed to JEDEC standard latency DDR3-1333MHz timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers and requires +1.5V. The JEDEC standard electrical and mechanical specifications are as follows:

UPC : 740617183283

Specifications

CL(IDD)	9 cycles
Row Cycle Time (tRCmin)	49.5ns (min.)
Refresh to Active/Refresh Command Time (tRFCmin)	160ns
Row Active Time (tRASmin)	36ns (min.)
Power	2.225 W (operating per module)
UL Rating	94 V - 0
Operating Temperature	0o C to 85o C
0o C to 85o C Storage Temperature	-55o C to +100o C
UPC	740617183283

Package Content

Kingston HyperX 2x4GB DDR3 1600Mhz Kit RAM

1 Year Manufacturer Warranty in Australia

All images are used for illustration purposes only. Actual item may slightly varies
While every attempt is made to ensure the information provided on this page is accurate, specifications change from time to time and we are not liable